LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical (Except Hybrid) >> VACUUM SWITCHING VALVE (for 1AR-FE) >> Removal

VACUUM SWITCHING VALVE (for 1AR-FE): Removal

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY 
    1. Slide the 2 clips and disconnect the 2 vacuum hoses and connector.
    2. Remove the bolt and No. 1 vacuum switching valve assembly.
      Fig 1: Locating No. 1 Vacuum Switching Valve With Bolt
      G06116804Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals