LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat (Except Hybrid) >> Rear No. 2 Seat Assembly >> Disassembly

Rear No. 2 Seat Assembly: Disassembly

  1. REMOVE RECLINING COVER PROTECTOR LH 
    1. Remove the 2 screws and the reclining cover protector LH.
    Fig 1: Identifying Reclining Cover Protector LH And Screws
    G05421831Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE NO. 2 SEAT HINGE COVER LH 
    1. Remove the 2 screws and the No. 2 seat hinge cover LH.
    Fig 2: Identifying No. 2 Seat Hinge Cover LH And Screws
    G05421832Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE RECLINING COVER PROTECTOR RH 
    1. Remove the 2 screws and the reclining cover protector RH.
    Fig 3: Identifying Reclining Cover Protector RH And Screws
    G05421833Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 2 SEAT HINGE COVER RH 
    1. Remove the 2 screws and the No. 2 seat hinge cover RH.
  5. REMOVE REAR NO. 2 SEAT CUSHION COVER WITH PAD 
    1. Disengage the 13 hooks.
      Fig 4: Identifying Rear No. 2 Seat Cushion Cover And Pad
      G05421834Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Fig 5: Locating Rear No. 2 Seat Cushion Cover And Hook
      G06113741Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 hog rings and the rear No. 2 seat cushion cover with pad.
    Fig 6: Identifying Rear No. 2 Seat Cushion Cover, Pad And Hog Rings
    G06113742Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE REAR NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY 
    1. Remove the 14 hog rings and the rear No. 2 seat cushion cover sub-assembly.
      Fig 7: Identifying Rear No. 2 Seat Cushion Cover Sub-Assembly And Hog Rings
      G05421836Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE NO. 1 REAR SIDE SEAT BAND SUB-ASSEMBLY 
    1. Remove the 2 clips.
    2. Separate the fastener and the rear side seat band sub-assembly.
    Fig 8: Removing No. 1 Rear Side Seat Band Sub-Assembly
    G06113744Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE REAR SEAT LOCK STRIKER COVER 
    1. Using a screwdriver wrapped with protective tape, disengage the claw.
    2. Disengage the 2 guides and remove the rear seat lock striker cover.
    Fig 9: Removing Rear Seat Lock Striker Cover
    G05421837Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE REAR NO. 2 SEAT HANDLE 
    1. Remove the 2 screws.
      Fig 10: Identifying Rear No. 2 Seat Handle And Screw
      G05421838Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the clamp.
    3. Disconnect the 2 cable clamps and remove the rear No. 2 seat handle as shown in the illustration.
    Fig 11: Identifying Rear No. 2 Seat Handle
    G06113747Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 12: Removing Rear No. 2 Seat Handle And Cable Clamps
    G05421839Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY 
    1. Disengage the 7 clips.
      Fig 13: Identifying No. 2 Seatback Board Sub-Assembly And Clips
      G06113749Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 3 hooks and remove the No. 2 seatback board sub-assembly.
  11. REMOVE NO. 1 REAR SEAT COVER BEZEL 
    1. Remove the 2 screws.
    2. Separate the hook and the No. 1 rear side seat band sub-assembly with No. 1 rear seat cover bezel.
      Fig 14: Removing No. 1 Rear Seat Cover Bezel
      G06113750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the No. 1 rear seat cover bezel.
  12. REMOVE REAR NO. 2 SEATBACK COVER WITH PAD 
    1. Remove the 4 hog rings.
      Fig 15: Removing Rear No. 2 Seatback Cover And Pad
      G06113751Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Fig 16: Locating Rear No. 2 Seatback Cover Hooks
      G06113752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 15 hooks.
    3. Disengage the 16 clips and remove the rear No. 2 seatback cover with pad.
  13. REMOVE REAR NO. 2 SEATBACK COVER SUB-ASSEMBLY 
    1. Remove the 18 hog rings and the rear No. 2 seatback cover sub-assembly.
    Fig 17: Identifying Rear No. 2 Seatback Cover Sub-Assembly And Clips
    G06113753Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 18: Identifying Hog Rings And Rear No. 2 Seatback Cover Sub-Assembly
    G05421843Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE NO. 2 REAR SEAT RECLINING COVER LH 
    1. Remove the screw.
    2. Disengage the guide and remove the No. 2 rear seat reclining cover LH.
    Fig 19: Identifying No. 2 Rear Seat Reclining Cover LH And Guide
    G05421844Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE NO. 2 REAR SEAT RECLINING COVER RH 
    1. Remove the screw.
    2. Disengage the guide and remove the No. 2 rear seat reclining cover RH.
    Fig 20: Identifying No. 2 Rear Seat Reclining Cover RH, Guide And Screw
    G05421845Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH 
    1. Remove the 2 screws and the rear No. 2 seat headrest cover LH.
      Fig 21: Identifying Rear No. 2 Seat Headrest Cover LH And Screw
      G06113757Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 2 cable clamps.
    3. Remove the 3 nuts and the rear No. 2 seat headrest assembly LH.
    Fig 22: Identifying Rear No. 2 Seat Headrest Assembly LH And Cable Clamps
    G06113758Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY RH 
    1. Remove the 2 screws and the rear No. 2 seat headrest cover RH.
      Fig 23: Identifying Rear No. 2 Seat Headrest Cover RH And Screw
      G06113759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 2 cable clamps.
    3. Remove the 3 nuts and the rear No. 2 seat headrest assembly RH.
    Fig 24: Locating Rear No. 2 Seat Headrest Assembly RH And Nuts
    G06113760Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. REMOVE REAR SEATBACK EDGE PROTECTOR 
    1. Disengage the 8 claws and remove the 4 rear seatback edge protectors.
    Fig 25: Identifying Rear Seatback Edge Protectors And Claws
    G06113761Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. REMOVE NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY LH 
    1. Remove the clamp.
    2. Disconnect the 2 cable clamps and remove the No. 2 rear seat cushion lock cable assembly LH.
    Fig 26: Identifying No. 2 Rear Seat Cushion Lock Cable Assembly LH And Clamp
    G06113762Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE NO. 1 REAR SEAT LOCK CABLE ASSEMBLY LH 
    1. Disconnect the 2 cable clamps and remove the No. 1 rear seat lock cable assembly LH.
    Fig 27: Identifying No. 1 Rear Seat Lock Cable Assembly LH
    G06113763Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  21. REMOVE NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY RH 
    1. Remove the clamp.
    2. Disconnect the 2 cable clamps and remove the No. 2 rear seat cushion lock cable assembly RH.
    Fig 28: Identifying No. 2 Rear Seat Cushion Lock Cable Assembly RH
    G06113764Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. REMOVE NO. 1 REAR SEAT LOCK CABLE ASSEMBLY RH 
    1. Disconnect the 2 cable clamps and remove the No. 1 rear seat lock cable assembly RH.
    Fig 29: Identifying No. 1 Rear Seat Lock Cable Assembly RH And Cable Clamp
    G06113765Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  23. REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY 
    1. Remove the 2 nuts, 2 bolts<A>, 2 spiral springs and the 2 E-rings.
    2. Remove the 2 bolts < b > and the 2 bushes.
    3. Remove the 2 bolts <C>, 2 washers and the No. 2 seat cushion frame sub-assembly.
    Fig 30: Identifying No. 2 Seat Cushion Frame Sub-Assembly And Bolts
    G06113766Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals