Outer Rear View Mirror: Installation

INSTALL OUTER MIRROR COVER (See INSTALLATION )
INSTALL OUTER MIRROR GLASS (w/o Heater) (See INSTALLATION )
INSTALL OUTER MIRROR GLASS (w/ Heater) (See INSTALLATION )
INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER
1. Engage the claw, and temporarily install the outer rear view mirror assembly with cover.
2. Tighten the 3 nuts in the order shown in the illustration to install the outer rear view mirror assembly with cover.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 1: Identifying Outer Rear View Mirror Assembly With Cover Nuts Tightening Sequence
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Engage the clamp and connect the connector.
4. Install the clip.
INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (See REASSEMBLY )
INSTALL COURTESY LIGHT ASSEMBLY (See REASSEMBLY )
INSTALL ASSIST GRIP COVER (See REASSEMBLY )
INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (See REASSEMBLY )
INSTALL FRONT ARMREST UPPER BASE PANEL (See REASSEMBLY )
INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG (See REASSEMBLY )

Fig 2: Identifying Outer Rear View Mirror Assembly With Cover Clamp And Clip
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (See REASSEMBLY )