Radiator Grille: Removal

1. Remove the 11 clips and cool air intake duct seal.
   Fig 1: Identifying Cool Air Intake Duct Seal Clips

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Put protective tape around the radiator grille.
   Fig 2: Putting Protective Tape Around Radiator Grille

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and 4 clips.
   Fig 3: Identifying Radiator Grille Bolts And Clips

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disengage the 6 claws and 4 guides, and remove the radiator grille.
   Fig 4: Removing Radiator Grille

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disengage the 3 claws and remove the radiator grille emblem.
   Fig 5: Identifying Radiator Grille Emblem Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 7 screws.
   Fig 6: Locating Inside Radiator Grille Screws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disengage the 9 claws and remove the inside radiator grille.
   Fig 7: Identifying Inside Radiator Grille Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disengage the 4 claws and remove the upper radiator grille moulding LH.

HINT:

Use the same procedure for the RH side and LH side.

Fig 8: Identifying Claws On Upper Radiator Grille Moulding LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disengage the 4 claws and remove the center radiator grille moulding LH.

HINT:

Use the same procedure for the RH side and LH side.

Fig 9: Identifying Claws On Center Radiator Grille Moulding LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disengage the 4 claws and remove the lower radiator grille moulding LH.

HINT:

Use the same procedure for the RH side and LH side.

Fig 10: Identifying Claws On Lower Radiator Grille Moulding LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002