LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Power Back Door Warning Buzzer >> Installation

Power Back Door Warning Buzzer: Installation

  1. INSTALL POWER BACK DOOR WARNING BUZZER 
    1. Engage the clamp and install the power back door warning buzzer.
    2. Connect the connector.
    Fig 1: Locating Power Back Door Warning Buzzer Connector With Clamp
    G05422347Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY  (See BACK DOOR OPENER SWITCH )
  3. INSTALL ASSIST STRAP ASSEMBLY  (See BACK DOOR OPENER SWITCH )
  4. INSTALL ASSIST STRAP HOLE COVER  (See BACK DOOR OPENER SWITCH )
  5. INSTALL BACK DOOR LOCK COVER  (See BACK DOOR OPENER SWITCH )
  6. INSTALL BACK DOOR TRIM COVER LH  (See BACK DOOR OPENER SWITCH )
  7. CONNECT POWER BACK DOOR ROD  (See BACK DOOR OPENER SWITCH )
  8. INSTALL BACK DOOR SERVICE HOLE COVER LH  (See BACK DOOR OPENER SWITCH )
  9. INSTALL BACK DOOR TRIM COVER RH  (See BACK DOOR OPENER SWITCH )
  10. INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY  (See BACK DOOR OPENER SWITCH )
scientia non olet · About LEMON Manuals