LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Power Back Door Main Switch >> Removal

Power Back Door Main Switch: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE RH 
    1. Disengage the 8 claws and guide, and remove the front door scuff plate RH.
    Fig 1: Identifying Front Door Scuff Plate RH Claws And Guide
    G05422313Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH 
    1. Remove the clip.
    2. Disengage the clip and claw, and remove the cowl side trim sub-assembly RH.
  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
    Fig 2: Identifying Clip And Claw Of Cowl Side Trim Sub-Assembly RH
    G05422314Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE BACK DOOR CONTROL SWITCH 
    1. Disengage the 2 claws and remove the back door control switch.
    Fig 3: Identifying Back Door Control Switch Claws
    G05422315Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals