LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Power Back Door Closer Switch >> Removal

Power Back Door Closer Switch: Removal

  1. REMOVE BACK WINDOW UPPER TRIM PANEL ASSEMBLY  (See DISASSEMBLY )
  2. REMOVE BACK DOOR SERVICE HOLE COVER LH  (See ADJUSTMENT )
  3. DISCONNECT POWER BACK DOOR ROD  (See ADJUSTMENT )
  4. REMOVE BACK DOOR TRIM COVER LH  (See ADJUSTMENT )
  5. REMOVE BACK DOOR TRIM COVER RH  (See ADJUSTMENT )
  6. REMOVE BACK DOOR LOCK COVER  (See ADJUSTMENT )
  7. REMOVE ASSIST STRAP HOLE COVER  (See ADJUSTMENT )
  8. REMOVE ASSIST STRAP ASSEMBLY  (See ADJUSTMENT )
  9. REMOVE BACK DOOR TRIM PANEL ASSEMBLY  (See ADJUSTMENT )
  10. REMOVE POWER BACK DOOR MAIN SWITCH 
    1. Disconnect the connector.
      Fig 1: Locating Power Back Door Main Switch Connector
      G05422325Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp.
      Fig 2: Identifying Clamp On Power Back Door Main Switch
      G05422326Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 4 claws and remove the power back door main switch.
    Fig 3: Identifying Power Back Door Main Switch Claws
    G05422327Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals