Power Back Door Closer Switch: Installation

INSTALL POWER BACK DOOR MAIN SWITCH
1. Engage the 4 claws and install the power back door main switch.
  
  Fig 1: Identifying Power Back Door Main Switch Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the clamp.
  
  Fig 2: Identifying Clamp On Power Back Door Main Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the connector.
INSTALL BACK DOOR TRIM PANEL ASSEMBLY (See BACK DOOR OPENER SWITCH )
INSTALL ASSIST STRAP ASSEMBLY (See BACK DOOR OPENER SWITCH )
INSTALL ASSIST STRAP HOLE COVER (See BACK DOOR OPENER SWITCH )

Fig 3: Locating Power Back Door Main Switch Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BACK DOOR LOCK COVER (See BACK DOOR OPENER SWITCH )
INSTALL BACK DOOR TRIM COVER LH (See BACK DOOR OPENER SWITCH )
CONNECT POWER BACK DOOR ROD (See BACK DOOR OPENER SWITCH )
INSTALL BACK DOOR SERVICE HOLE COVER LH (See BACK DOOR OPENER SWITCH )
INSTALL BACK DOOR TRIM COVER RH (See BACK DOOR OPENER SWITCH )
INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY (See BACK DOOR OPENER SWITCH )