On-Vehicle Inspection

INSPECT HOOD SUB-ASSEMBLY

Check that the clearance measurements of areas A through D are within each standard range.

Fig 1: Identifying Hood Clearance

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard clearance

STANDARD CLEARANCE REFERENCE

Area	Measurement	Area	Measurement
A	6.2 to 10.2 mm (0.244 to 0.402 in.)	C	2.5 to 5.5 mm (0.098 to 0.217 in.)
B	5.9 to 9.9 mm (0.232 to 0.390 in.)	D	-1.5 to 1.5 mm (-0.059 to 0.059 in.)