On-Vehicle Inspection

INSPECT FRONT DOOR PANEL SUB-ASSEMBLY

Check that the clearance measurements of areas A through P are within each standard range.

Fig 1: Identifying Front Door Panel Sub-Assembly Clearance

G05422095

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard clearance

STANDARD CLEARANCE REFERENCE

Area	Measurement	Area	Measurement
A	2.9 to 6.9 mm (0.114 to 0.272 in.)	I	2.5 to 5.5 mm (0.098 to 0.217 in.)
B	3.0 to 6.0 mm (0.118 to 0.236 in.)	J	4.2 to 7.2 mm (0.165 to 0.284 in.)
C	-1.5 to 1.5 mm (-0.059 to 0.059 in.)	K	2.9 to 5.9 mm (0.114 to 0.232 in.)
D	3.0 to 6.0 mm (0.118 to 0.236 in.)	L	3.3 to 6.3 mm (0.130 to 0.248 in.)
E	-1.5 to 1.5 mm (-0.059 to 0.059 in.)	M	3.3 to 6.3 mm (0.130 to 0.248 in.)
F	4.2 to 7.2 mm (0.165 to 0.284 in.)	N	-1.5 to 1.5 mm (-0.059 to 0.059 in.)
G	6.4 to 9.4 mm (0.252 to 0.370 in.)	0	3.3 to 6.3 mm (0.130 to 0.248 in.)
H	4.2 to 7.2 mm (0.165 to 0.284 in.)	P	-1.5 to 1.5 mm (-0.059 to 0.059 in.)