LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Back Window Support >> Disposal

Back Window Support: Disposal

  1. DISPOSE OF BACK WINDOW STAY ASSEMBLY 
    1. Secure the back window stay assembly horizontally in a vise with the piston-rod pulled out.
    2. Wear safety glasses. Use a metal saw to slowly cut a groove between A and B shown in the illustration to release the gas.
      NOTE: Although the gas inside the back window stay assembly is colorless, odorless, and harmless, metal debris may scatter. Therefore, cover the back window stay assembly with a piece of cloth or other material.
      Fig 1: Identifying Hood Support Assembly Cutting Area
      G04981636Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals