LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer (Except Hybrid) >> ENGINE IMMOBILISER SYSTEM (w/o Smart Key System) >> DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the tester on.
    4. Select the following menu items: Body Electrical/Immobiliser/Trouble Codes.
    5. Check the details of the DTC (s) (See DIAGNOSTIC TROUBLE CODE CHART  ).
  2. CLEAR DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the tester on.
    4. Select the following menu items: Body Electrical/Immobiliser/Trouble Codes.
    5. Erase the DTCs.
scientia non olet · About LEMON Manuals