Washer Nozzle: Removal

REMOVE WASHER NOZZLE SUB-ASSEMBLY
1. Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
  NOTE: Be careful not to damage the windshield.
  
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 1: Identifying Washer Nozzle Sub-Assembly And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the washer nozzle sub-assembly from the washer hose.
  NOTE: Washer nozzles cannot be reused.