On-Vehicle Inspection
- INSPECT FRONT WASHER NOZZLE SUB-ASSEMBLY
- With the engine running, check the positions that the washer fluid hits the windshield.WASHER NOZZLE SPRAY DIMENSION
Area Dimension A 353 mm (13.88 in.) B 143 mm (5.70 in.) C 193 mm (7.61 in.) OK:
Washer fluid hits the windshield in the areas shown in the illustration.
HINT:
If the result is not as specified, replace the washer nozzle.
- With the engine running, check the positions that the washer fluid hits the windshield.
- INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY
- With the engine running, check the position that the washer fluid hits the windshield.WASHER NOZZLE SPRAY DIMENSION
Area Dimension Area Dimension A 265 mm (10.44 in.) E 252 mm (9.92 in.) B 197 mm (7.77 in.) F 178 mm (7.00 in.) C 0.4 mm (0.01 in.) G 25 mm (0.98 in.) D 109 mm (4.27 in.) H 139 mm (5.46 in.) OK:
Washer fluid hits the windshield in the areas shown in the illustration.
- With the engine running, check the position that the washer fluid hits the windshield.