Seat Variable Cushion Switch: Inspection

INSPECT SEAT VARIABLE CUSHION SWITCH

Inspect the seat variable cushion switch.

Measure the resistance between the terminals when the switch is operated.

Fig 1: Inspecting Seat Variable Cushion Switch

G05421927

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard resistance

SWITCH SPECIFICATION

Tester Connection	Switch Condition	Specified Condition
b7-4 (E) - b7-5 (CSNF)	FRONT	Below 1 Ω
b7-2 (B) - b7-3 (CSNR)	FRONT	Below 1 Ω
b7-4 (E) - b7-3 (CSNR)	FRONT	10 kΩ or higher
b7-2 (B) - b7-5 (CSNF)	FRONT	10 kΩ or higher
b7-4 (E) - b7-5 (CSNF)	OFF	Below 1 Ω
b7-1 (E) - b7-3 (CSNR)	OFF	Below 1 Ω
b7-4 (E) - b7-3 (CSNR)	OFF	10 kΩ or higher
b7-1 (E) - b7-5 (CSNF)	OFF	10 kΩ or higher
b7-1 (E) - b7-3 (CSNR)	REAR	Below 1 Ω
b7-2 (B) - b7-5 (CSNF)	REAR	Below 1 Ω
b7-1 (E) - b7-5 (CSNF)	REAR	10 kΩ or higher
b7-2 (B) - b7-3 (CSNR)	REAR	10 kΩ or higher

If the result is not as specified, replace the seat variable cushion switch.