LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Highlander Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Except Hybrid) >> Stop Light Switch >> Inspection

Stop Light Switch: Inspection

  1. INSPECT STOP LIGHT SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
    Fig 1: Removing Stop Light Switch Assembly With Lock Nut
    G05419894Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 2: Inspecting Stop Light Switch Assembly
    G05390846Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Standard resistance 

    TESTER CONNECTION SPECIFIED CONDITION CHART

    Tester Connection Switch Condition Specified Condition
    1 - 2 Pushed 10 kΩ or higher
    Not pushed Below 1 Ω
    3 - 4 Pushed Below 1 Ω
    Not pushed 10 kΩ or higher

    If the result is not as specified, replace the stop light switch assembly.

scientia non olet · About LEMON Manuals