HIGH MOUNTED STOP LIGHT ASSEMBLY (for Rear Spoiler without Press Line): Removal
- PRECAUTION
NOTE:
- Be sure to use the centering jig when removing and installing the rear wiper motor assembly (for Glass Hatch Type). Failure to do so will result in a change of the location of the axis of the rear wiper motor assembly (for Glass Hatch Type), causing the wiping angle to change.
- After installing the rear wiper motor assembly (for Glass Hatch Type), do not open the glass hatch before installing the rear wiper link pivot.
- If the rear wiper motor assembly is removed without using the centering jig, the rear wiper motor assembly must be replaced with a new one.
- REMOVE BACK WINDOW UPPER TRIM PANEL ASSEMBLY
(See
DISASSEMBLY
)
- REMOVE BACK DOOR TRIM COVER LH (w/o Power Back Door)
(See
DISASSEMBLY
)
- REMOVE BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)
(See
DISASSEMBLY
)
- DISCONNECT POWER BACK DOOR ROD (w/ Power Back Door)
(See
DISASSEMBLY
)
- REMOVE BACK DOOR TRIM COVER LH (w/ Power Back Door)
(See
DISASSEMBLY
)
- REMOVE BACK DOOR TRIM COVER RH
(See
DISASSEMBLY
)
- REMOVE BACK DOOR LOCK COVER (for Glass Hatch Type)
(See
DISASSEMBLY
)
- REMOVE ASSIST STRAP HOLE COVER
(See
DISASSEMBLY
)
- REMOVE ASSIST STRAP ASSEMBLY
(See
DISASSEMBLY
)
- REMOVE BACK DOOR TRIM PANEL ASSEMBLY
(See
DISASSEMBLY
)
- REMOVE REAR WIPER SHAFT COVER (for Glass Hatch Type)
(See
REMOVAL
)
- REMOVE REAR WIPER ARM HEAD CAP
(See
REMOVAL
)
- REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
(See
REMOVAL
)
- REMOVE REAR WIPER LINK CAP (for Glass Hatch Type)
(See
REMOVAL
)
- REMOVE REAR WIPER MOTOR GROMMET (for Fixed Glass Type)
(See
REMOVAL
)
- REMOVE REAR WIPER LINK PIVOT (for Glass Hatch Type)
(See
REMOVAL
)
- REMOVE REAR WIPER MOTOR ASSEMBLY (for Fixed Glass Type)
(See
REMOVAL
)
- REMOVE REAR WIPER MOTOR ASSEMBLY (for Glass Hatch Type)
(See
REMOVAL
)
- REMOVE BACK DOOR GLASS GUIDE BRACKET SUB-ASSEMBLY (for Fixed Glass Type)
(See
DISASSEMBLY
)
- REMOVE REAR SPOILER SUB-ASSEMBLY
(See
REMOVAL
)
- REMOVE CENTER STOP LIGHT ASSEMBLY
- Remove the 2 screws.
- Disconnect the center stop light assembly from the rear spoiler sub-assembly.
- Disconnect the connector and remove the center stop light assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002