Rear Bumper: Removal

REMOVE REAR BUMPER ASSEMBLY
1. Put protective tape around the rear bumper assembly.
  
  Fig 1: Putting Protective Tape Around Rear Bumper Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 5 clips, 8 screws and 2 bolts.
  
  Fig 2: Identifying Rear Bumper Assembly With Clips, Screws And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disengage the 8 claws and disconnect the rear bumper assembly.
  HINT:
  
  Use the same procedure for the RH side and LH side.
4. Remove the rear bumper assembly.
  
  Fig 3: Disconnecting Rear Bumper Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002