Rear Bumper: Reassembly

INSTALL NO. 1 REAR BUMPER SIDE SUPPORT
1. Engage the 2 claws and install a new No. 1 rear bumper side support.
  HINT:
  
  Use the same procedure for the RH side and LH side.
  
  Fig 1: Identifying Claws On No. 1 Rear Bumper Side Support
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH
1. Engage the 3 claws and install a new No. 2 rear bumper side support LH.
2. Install the 2 screws.
  Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH
HINT:

Use the same procedures for the RH side and LH side.

Fig 2: Identifying No. 2 Rear Bumper Side Support LH With Claws And Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER SIDE RETAINER LH
1. Engage the 2 claws and install a new rear bumper side retainer LH.
2. Install the screw.
  Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
INSTALL REAR BUMPER SIDE RETAINER RH
HINT:

Use the same procedures for the RH side and LH side.

Fig 3: Identifying Rear Bumper Side Retainer LH With Claws And Screw
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER REINFORCEMENT
1. Install the rear bumper reinforcement with the 6 nuts.
  Torque: 64 N*m (653 kgf*cm, 47 ft.*lbf)
  
  Fig 4: Identifying Rear Bumper Reinforcement Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER PLATE LH
1. Engage the 3 claws and install the rear bumper plate LH.
INSTALL REAR BUMPER PLATE RH
HINT:

Use the same procedure for the RH side and LH side.

Fig 5: Identifying Claws On Rear Bumper Plate LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER BAR
1. Install the rear bumper bar on the rear bumper energy absorber.
  
  Fig 6: Identifying Rear Bumper Bar
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR BUMPER ENERGY ABSORBER
1. Engage the 2 guides and install the rear bumper energy absorber.
INSTALL LOWER REAR BUMPER COVER
1. Engage the 10 claws and 2 guides, and install the lower rear bumper cover.
2. Install the 2 clips.
  
  Fig 7: Identifying Rear Bumper Energy Absorber Guides
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 8: Identifying Lower Rear Bumper Cover Claws And Guides
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REFLEX REFLECTOR ASSEMBLY LH
1. Install the reflex reflector assembly LH with the nut.
INSTALL REFLEX REFLECTOR ASSEMBLY RH
HINT:

Use the same procedure for the RH side and LH side.

Fig 9: Identifying Reflex Reflector Assembly LH With Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002