Name Plate: Removal

HINT:

When removing the name plate and emblem heat the vehicle body, name plate and emblem using a heat light.

Heating temperature

TEMPERATURE SPECIFICATION

Item	Temperature
Vehicle Body	40 to 60°C (104 to 140°F)
Name Plate, Emblem	20 to 30°C (68 to 86°F)

NOTE: Do not heat the vehicle body, name plate or emblem excessively.

REMOVE SYMBOL EMBLEM
1. Put protective tape around the symbol emblem.
2. Using a moulding remover, peel off the double-sided tape and remove the symbol emblem.
  NOTE: Be careful not to damage the vehicle body.
  
  Fig 1: Putting Protective Tape Around Emblem Symbol Emblem
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 BACK DOOR NAME PLATE
1. Put protective tape around the name plate.
2. Using a moulding remover, peel off the double-sided tape and remove the name plate.
  NOTE: Be careful not to damage the vehicle body.
  
  Fig 2: Putting Protective Tape Around No. 2 Back Door Name Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 4 BACK DOOR NAME PLATE
1. Put protective tape around the name plate.
2. Using a moulding remover, peel off the double-sided tape and remove the name plate.
  NOTE: Be careful not to damage the vehicle body.
  
  Fig 3: Putting Protective Tape Around No. 4 Back Door Name Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE BACK DOOR NAME PLATE
1. Put protective tape around the name plate.
2. Using a moulding remover, peel off the double-sided tape and remove the name plate.
  NOTE: Be careful not to damage the vehicle body.
  
  Fig 4: Putting Protective Tape Around Back Door Name Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT DOOR NAME PLATE
1. Put protective tape around the name plate.
2. Using a moulding remover, peel off the double-sided tape and remove the name plate.
  NOTE: Be careful not to damage the vehicle body.
  
  Fig 5: Putting Protective Tape Around Front Door Name Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002