Front Bumper: Reassembly

INSTALL FRONT BUMPER STAY LH
1. Engage the 2 claws and install the front bumper stay LH.
2. Install the bolt and screw.
  Torque: Bolt
  
  5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Screw
  
  3.0 N*m (31 kgf*cm, 27 in.*lbf)
  
  Fig 1: Identifying Front Bumper Stay LH With Claws, Bolt And Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER STAY RH
HINT:

Use the same procedures for the RH side and LH side.
INSTALL FRONT BUMPER REINFORCEMENT
1. Install the front bumper reinforcement with the 6 bolts.
  Torque: 64 N*m (653 kgf*cm, 47 ft.*lbf)
  
  Fig 2: Identifying Front Bumper Reinforcement Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER ENERGY ABSORBER
1. Engage the 2 guides and install the front bumper energy absorber.
  
  Fig 3: Identifying Front Bumper Energy Absorber Guides
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER HOLE COVER LH
1. Engage the 2 claws and install the front bumper hole cover LH.
INSTALL FRONT BUMPER HOLE COVER RH
HINT:

Use the same procedure for the RH side and LH side.

Fig 4: Identifying Claws On Hole Cover LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FOG LIGHT COVER LH
1. Engage the 6 claws and install the fog light cover LH.
INSTALL FOG LIGHT COVER RH
HINT:

Use the same procedure for the RH side and LH side.

Fig 5: Identifying Claws On Fog Light Cover LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) (See REASSEMBLY )
INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
HINT:

Use the same procedure for the RH side and LH side.