Front Bumper: Disassembly

REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light) (See REMOVAL )
REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
HINT:

Use the same procedure for the RH side and LH side.
REMOVE FOG LIGHT COVER LH
1. Disengage the 6 claws and remove the fog light cover LH.
REMOVE FOG LIGHT COVER RH
HINT:

Use the same procedure for the RH side and LH side.

Fig 1: Identifying Claws On Fog Light Cover LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT BUMPER HOLE COVER LH
1. Disengage the 2 claws and remove the hole cover LH.
REMOVE FRONT BUMPER HOLE COVER RH
HINT:

Use the same procedure for the RH side and LH side.

Fig 2: Identifying Claws On Hole Cover LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT BUMPER ENERGY ABSORBER
1. Disengage the 2 guides and remove the front bumper energy absorber.
  
  Fig 3: Identifying Front Bumper Energy Absorber Guides
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT BUMPER REINFORCEMENT
1. Remove the 6 bolts and front bumper reinforcement.
  
  Fig 4: Identifying Front Bumper Reinforcement Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT BUMPER STAY LH
1. Remove the bolt and screw.
2. Disengage the 2 claws and remove the front bumper stay LH.
REMOVE FRONT BUMPER STAY RH
HINT:

Use the same procedures for the RH side and LH side.

Fig 5: Identifying Front Bumper Stay LH With Claws, Bolts And Screw
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002