On-Vehicle Inspection
- INSPECT OCCUPANT CLASSIFICATION ECU (VEHICLE NOT INVOLVED IN COLLISION)
- Perform a diagnostic system check (See DTC CHECK / CLEAR ).
- INSPECT OCCUPANT CLASSIFICATION ECU (VEHICLE INVOLVED IN COLLISION)
- Perform a diagnostic system check (See DTC CHECK / CLEAR ).
- Even if an airbag was not deployed, check if there is any damage to the occupant classification ECU. If there are any following defects, replace the occupant classification ECU with a new one:
- Cracks, dents or chips on the case.
- Cracks or other damage to the connector.
CAUTION: Be sure to follow the correct removal and installation procedures of the occupant classification ECU.