LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla XLE, 1.8 L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical (2AZ-FE)) >> Drive Belt >> Removal

Drive Belt: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE ENGINE UNDER COVER RH 
  2. REMOVE V-RIBBED BELT 
    1. Using SST, slowly turn the V-ribbed belt tensioner clockwise.

      SST 09216-42010 (09216-04010) 

    2. Remove the V-ribbed belt from each pulley and slowly return the tensioner.
    NOTE:
    • Make sure that SST and other tools are set to the tensioner securely.
    • When compressing the V-ribbed belt tensioner, slowly turn the tensioner.
    • Be careful not to pinch your fingers between the parts.
    Fig 1: Turning V-Ribbed Belt Tensioner Clockwise
    G06008217Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals