Drive Belt: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL V-RIBBED BELT
HINT:

The illustration shows the V-ribbed belt layout.

Fig 1: V-Ribbed Belt Routing
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Using SST, slowly turn the V-ribbed belt tensioner clockwise and install the V-ribbed belt.
SST 09216-42010 (09216-04010)
NOTE:
- Make sure that SST and other tools are set to the tensioner securely.
- When compressing the V-ribbed belt tensioner, slowly turn the tensioner.
INSTALL ENGINE UNDER COVER RH

Fig 2: Turning V-Ribbed Belt Tensioner Clockwise
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002