Clutch Pedal Switch: Installation
WARNING: This page is about a different variant/trim than selected.
- INSTALL CLUTCH PEDAL SWITCH ASSEMBLY
- Install the clutch pedal switch assembly to the clutch pedal support sub-assembly with the nut.
Torque: 16 N*m (160 kgf*cm, 12 ft.*lbf)
- Connect the clutch pedal switch assembly connector.
- Install the clutch pedal switch assembly to the clutch pedal support sub-assembly with the nut.
- INSPECT CLUTCH PEDAL SWITCH ASSEMBLY (See ON-VEHICLE INSPECTION )