CLUTCH RELEASE CYLINDER (for C59): Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY
1. Using a union nut wrench (10 mm), disconnect the clutch line.
  HINT:
  
  Use a container to catch the fluid.
  
  Fig 1: Disconnecting Clutch Line
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and disconnect the clutch tube bracket.
  
  Fig 2: Locating Clutch Tube Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 bolts and the clutch release cylinder.