CLUTCH RELEASE CYLINDER (for C59): Disassembly

WARNING: This page is about a different variant/trim than selected.

REMOVE RELEASE CYLINDER BLEEDER PLUG
1. Remove the bleeder plug cap from the bleeder plug.
2. Remove the bleeder plug from the cylinder body.
  
  Fig 1: Locating Clutch Release Cylinder Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CLUTCH RELEASE CYLINDER KIT
1. Remove the boot from the cylinder body.
2. Remove the push rod from the cylinder body.
3. Remove the piston and spring from the cylinder body.
  NOTE: Do not damage the inside of the cylinder body.
  
  Fig 2: Identifying Spring, Piston, Boot And Push Rod
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002