Manual Transaxle Assembly: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
HINT:

See the steps from "Discharge Fuel System Pressure" through "Remove Engine Assembly With Transaxle" (See REMOVAL ).
REMOVE REAR ENGINE MOUNTING INSULATOR (See REMOVAL )
REMOVE FRONT ENGINE MOUNTING INSULATOR (See REMOVAL )
INSTALL ENGINE HANGER (See INSTALLATION )
REMOVE STARTER ASSEMBLY (See DISASSEMBLY )
REMOVE MANUAL TRANSAXLE ASSEMBLY
1. Remove the 7 bolts and the manual transaxle.
  
  Fig 1: Locating Manual Transaxle Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONTROL CABLE BRACKET
1. Remove the 2 bolts and the control cable bracket.
  
  Fig 2: Locating Control Cable Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ENGINE MOUNTING BRACKET LH
1. Remove the 4 bolts and the engine mounting bracket LH.
  
  Fig 3: Locating Engine Mounting Bracket LH And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT ENGINE MOUNTING BRACKET
1. Remove the 3 bolts and the front engine mounting bracket.
  
  Fig 4: Locating Front Engine Mounting Bracket And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR ENGINE MOUNTING BRACKET
1. Remove the 3 bolts and the rear engine mounting bracket.
  
  Fig 5: Locating Rear Engine Mounting Bracket And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002