LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla XLE, 1.8 L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Manual Transmission - C59) >> Back-Up Light Switch >> Inspection

Back-Up Light Switch: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT BACK-UP LIGHT SWITCH ASSEMBLY 
    1. Measure the resistance of the switch.

      Standard Resistance 

    RESISTANCE REFERENCE

    Tester Connection Switch Condition Specified Condition
    1 - 2 Pushed Below 1 Ω
    1 - 2 Released 10 kΩ or higher

    If the result is not as specified, replace the back-up light switch assembly.

    Fig 1: Measuring Resistance Of Switch
    G06012707Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals