LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla XLE, 1.8 L >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Rear >> Rear Brake Shoe, Wheel Cylinder & Brake Drum >> Reassembly

Rear Brake Shoe, Wheel Cylinder & Brake Drum: Reassembly

  1. INSTALL REAR WHEEL BRAKE CYLINDER COMPRESSION SPRING 
    1. Install the rear wheel brake cylinder compression spring to the rear wheel brake cylinder assembly.
  2. INSTALL REAR WHEEL CYLINDER CUP KIT 
    1. Apply lithium soap base glycol grease to 2 new wheel cylinder cups and the 2 pistons.
    2. Install the 2 wheel cylinder cups to each piston.
    3. Install the 2 pistons to the wheel brake cylinder.
    4. Install 2 new wheel cylinder boots to the rear wheel brake cylinder assembly.
      Fig 1: Locating Grease Applying Area On Wheel Cylinder Cups And Pistons
      G06010134Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals