Brake System: Precaution

NOTE:

Care must be taken to replace each part properly as it could affect the performance of the brake system and result in a driving hazard. Replace the parts with those having the same part number or equivalent.
It is very important to keep parts and the area clean when repairing the brake system.
If the vehicle is equipped with a mobile communication system, refer to the Precaution in the introduction section (See REPAIR INSTRUCTION ).
Care must be taken when using magnets as they could affect the performance of the speed sensors.
Since the brake lines are classified as critical safety related parts, be sure to disassemble and inspect the components if a brake fluid leak is found. If any abnormality is found, replace the component with a new one.
When removing brake components, cover the brake line connections to prevent foreign matter such as dust or dirt from entering the lines.
Do not damage or deform the brake lines during the removal and installation procedures.
Do not allow brake fluid to adhere to any painted surface such as the vehicle body. If brake fluid leaks onto any painted surface, immediately wash it off.