LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla XLE, 1.8 L >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Pedal >> Reassembly

Brake Pedal: Reassembly

  1. INSTALL BRAKE PEDAL PAD 
    1. Install the brake pedal pad.
  2. INSTALL BRAKE PEDAL BUSHING 
    1. Apply lithium soap base glycol grease to 2 new brake pedal bushings, and install them to the brake pedal sub-assembly.
  3. INSTALL BRAKE PEDAL SUB-ASSEMBLY 
    1. Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the bolt and nut as shown in the illustration.

      Torque: 37 N*m (377 kgf*cm, 27 ft.*lbf) 

      Fig 1: Installing Brake Pedal Sub-Assembly Bolt
      G06009986Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals