How To Proceed With Troubleshooting
- VEHICLE BROUGHT TO WORKSHOP
- CUSTOMER PROBLEM ANALYSIS
- CHECK CAN COMMUNICATION SYSTEM
- Check for DTC output (See
DIAGNOSIS SYSTEM
).
Result
RESULT REFERENCEResult Proceed to No CAN DTC output A CAN DTC output B B: GO TO CAN COMMUNICATION SYSTEM (See HOW TO PROCEED WITH TROUBLESHOOTING )
A: Go to next step
- Check for DTC output (See
DIAGNOSIS SYSTEM
).
- PROBLEM SYMPTOM CONFIRMATION
- SYMPTOM SIMULATION
- PROBLEM SYMPTOMS TABLE
- Refer to Problem Symptoms Table (See PROBLEM SYMPTOMS TABLE ).
- CIRCUIT INSPECTION
- REPAIR OR REPLACE
- CONFIRMATION TEST
NEXT: END