PCV Valve: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (See COMPONENTS )
REMOVE VENTILATION VALVE SUB-ASSEMBLY
1. Disconnect the ventilation hose from the ventilation valve sub-assembly.
  
  Fig 1: Locating Ventilation Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a 22 mm deep socket wrench, remove the ventilation valve sub-assembly.
  
  Fig 2: Removing Ventilation Valve Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002