Cooling Fan Motor: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE RADIATOR ASSEMBLY
HINT:

See REMOVAL .
REMOVE FAN
1. Remove the 2 nuts and 2 fans.
  
  Fig 1: Locating Fans Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 COOLING FAN MOTOR
1. Detach the 4 harness clamps from the fan shroud.
  
  Fig 2: Locating No. 2 Cooling Fan Motor Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws and cooling fan motor insulator.
  
  Fig 3: Identifying Cooling Fan Motor Insulator And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 3 screws, and then remove the No. 2 cooling fan motor.
  
  Fig 4: Locating No. 2 Cooling Fan Motor Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE COOLING FAN MOTOR
1. Detach the 3 harness clamps from the fan shroud.
  
  Fig 5: Identifying Cooling Fan Motor Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 3 screws, and then remove the cooling fan motor.
  
  Fig 6: Locating Cooling Fan Motor Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002