LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla S, 1.8 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Lubrication System (2AZ-FE)) >> Oil Pump >> Disassembly

Oil Pump: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE OIL PUMP STRAINER 
    1. Remove the 2 nuts, oil pump strainer and gasket.
    Fig 1: Identifying Nuts, Oil Pump Strainer And Gasket
    G04975410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE OIL PUMP RELIEF VALVE 
    1. Using a 27 mm socket wrench, remove the plug.
    2. Remove the valve spring and relief valve.
    Fig 2: Identifying Valve Spring And Relief Valve
    G04975411Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE OIL PUMP COVER 
    1. Remove the 5 bolts and oil pump cover.
    2. Remove the oil pump drive and driven rotors from the oil pump.
      Fig 3: Identifying Bolts And Oil Pump Cover
      G04975412Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals