LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla S, 1.8 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Lubrication System (2AZ-FE)) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE  (See ON-VEHICLE INSPECTION )
  2. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Disconnect the oil pressure switch connector.
    2. Using a 24 mm deep socket wrench, remove the oil pressure switch.
scientia non olet · About LEMON Manuals