DTC P0011 Camshaft Position "A" - Timing Over-Advanced or System Performance (Bank 1); DTC P0012 Camshaft Position "A" - Timing Over-Retarded (Bank 1): Description
WARNING: This page is about a different variant/trim than selected.
Refer to DTC P0010 (See DTC P0010 CAMSHAFT POSITION "A" ACTUATOR CIRCUIT (BANK 1) ).
DTC DETECTION CONDITION CHART
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0011 | Valve timing is not adjusted in valve timing advance range (1 trip detection logic) |
|
| P0012 | Valve timing is not adjusted in valve timing retard range (2 trip detection logic) |