LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla S, 1.8 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System (2AZ-FE) - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection And Installation) >> Mass Air Flow Meter >> Installation

Mass Air Flow Meter: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.

      Torque: 1.0 N*m (10 kgf*cm, 9 in.*lbf) 

    2. Connect the mass air flow meter connector.
      Fig 1: Locating Mass Air Flow Meter Connector Screws
      G06007628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals