LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla S, 1.8 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System (2AZ-FE) - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection And Installation) >> Integration Relay >> Installation

Integration Relay: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL INTEGRATION RELAY 
    1. Connect the 3 connectors.
      Fig 1: Locating Integration Relay Connectors
      G06007688Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Attach the integration relay to the engine room relay block.
  2. INSTALL NO. 1 RELAY BLOCK COVER 
    Fig 2: Identifying Engine Room Relay Block
    G06007694Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals