Ignition Coil And Spark Plug: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE IGNITION COIL ASSEMBLY
1. Disconnect the 4 ignition coil connectors.
  
  Fig 1: Locating Ignition Coil Connectors Locations
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 4 bolts and 4 ignition coils.
  
  Fig 2: Identifying Ignition Coils Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SPARK PLUG
1. Remove the 4 spark plugs.
  
  Fig 3: Locating Spark Plug
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002