Valve Body Assembly: Reassembly

WARNING: This page is about a different variant/trim than selected.

INSTALL NO. 3 SOLENOID LOCK PLATE
1. Install the shift solenoid valve SLT to the valve body.
2. Install the No. 1 solenoid lock plate to the shift solenoid valve SLT.
3. Install the shift solenoid valve ST to the valve body.
4. Install the No. 3 solenoid lock plate to the valve body with the 2 bolts.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
  
  Fig 1: Locating No. 3 Solenoid Lock Plate Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE SLU
1. Install the shift solenoid valve SLU onto the valve body.
2. Install the solenoid lock plate with the bolt.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
  
  Fig 2: Locating Shift Solenoid Valve SLU Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE S2
1. Install the shift solenoid valve S2 to the valve body with the bolt.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
  
  Fig 3: Locating Shift Solenoid Valve S2 Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE S1
1. Install the shift solenoid valve S1 to the valve body with the bolt.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
  
  Fig 4: Locating Shift Solenoid Valve S1 Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002