LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla S, 1.8 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transmission - U341E) >> Valve Body Assembly >> Disassembly

Valve Body Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE SHIFT SOLENOID VALVE S1 
    1. Remove the bolt and pull out the shift solenoid valve S1.
    Fig 1: Locating Shift Solenoid Valve S1 Bolt
    G04831536Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE SHIFT SOLENOID VALVE S2 
    1. Remove the bolt and pull out the shift solenoid valve S2.
    Fig 2: Locating Shift Solenoid Valve S2 Bolt
    G04831537Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE SHIFT SOLENOID VALVE SLU 
    1. Remove the bolt and solenoid lock plate.
    2. Pull out the shift solenoid valve SLU.
    Fig 3: Locating Shift Solenoid Valve SLU Bolt
    G06012094Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 3 SOLENOID LOCK PLATE 
    1. Remove the 2 bolts and No. 3 solenoid lock plate from the valve body.
    2. Pull out the shift solenoid valve ST from the valve body.
    3. Remove the No. 1 solenoid lock plate from the shift solenoid valve SLT.
    4. Pull out the shift solenoid valve SLT from the valve body.
    Fig 4: Locating No. 3 Solenoid Lock Plate Bolts
    G05400376Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals