DTC P0705 Transmission Range Sensor Circuit Malfunction (PRNDL Input): Description

WARNING: This page is about a different variant/trim than selected.

The park/neutral position switch detects the shift lever position and sends signals to the ECM.

DTC DETECTION CONDITION CHART

DTC No.	DTC Detection Condition	Trouble Area
P0705	(A) Any 2 or more signals of the following are ON simultaneously (2-trip detection logic) STAR input signal is ON. R input signal is ON. D input signal is ON. 2 input signal is ON. L input signal is ON. (B) Any 2 or more signals of the following are ON simultaneously (2-trip detection logic) P input signal is ON. R input signal is ON. N input signal is ON. D input signal is ON. 2 input signal is ON. L input signal is ON. (C) All switches are OFF simultaneously for P, R, N, D, 2 and L positions (2-trip detection logic) (D) Both 1 and 2 are met (2-trip detection logic) One of following is met STAR input signal is ON. P input signal is ON. R input signal is ON. N input signal is ON. One of following is ON. 3 input signal is ON.	Open or short in park/neutral position switch circuit Park/neutral position switch ECM

DTC No.

DTC Detection Condition

Trouble Area

P0705

(A) Any 2 or more signals of the following are ON simultaneously (2-trip detection logic)

(B) Any 2 or more signals of the following are ON simultaneously (2-trip detection logic)

(D) Both 1 and 2 are met (2-trip detection logic)

One of following is met
1. STAR input signal is ON.
2. P input signal is ON.
3. R input signal is ON.
4. N input signal is ON.
One of following is ON.
1. 3 input signal is ON.