Valve Body Assembly: Reassembly

WARNING: This page is about a different variant/trim than selected.

INSTALL SHIFT SOLENOID VALVE SL1
1. Install the shift solenoid valve SL1 and lock plate to the valve body assembly with the bolt.
  Torque: 6.6 N*m (67 kgf*cm, 58 in.*lbf)
  
  Fig 1: Identifying Shift Solenoid Valve SL1
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE SL2
1. Install the shift solenoid valve SL2 and lock plate to the valve body assembly with the bolt.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
  
  Fig 2: Identifying Shift Solenoid Valve SL2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE DSL
1. Install the shift solenoid valve DSL to the valve body assembly with the bolt.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
  
  Fig 3: Locating Bolt And Shift Solenoid Valve DSL
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE SR
1. Install the shift solenoid valve SR to the valve body assembly.
  
  Fig 4: Identifying Shift Solenoid Valve SR
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE S4
1. Install the shift solenoid valve S4 to the valve body assembly with the bolt.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
INSTALL SHIFT SOLENOID VALVE SL3
1. Install the shift solenoid valve SL3 to the valve body assembly.
  
  Fig 5: Locating Bolt And Shift Solenoid Valve S4
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT SOLENOID VALVE SLT
1. Install the shift solenoid valve SLT and lock plate to the valve body assembly with the bolt.
  Torque: 6.6 N*m (67 kgf*cm, 58 in.*lbf)