Park/Neutral Position Switch: Inspection
WARNING: This page is about a different variant/trim than selected.
- INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
RESISTANCE SPECIFICATIONTester Connection Condition Specified Connection 2 - 6 and 4 - S P Below 1 Ω Except P 10 kΩ or higher 2 - 1 R Below 1 Ω Except R 10 kΩ or higher 2 - 9 and 4 - 5 N Below 1 Ω Except N 10 kΩ or higher 2 - 7 D and S Below 1 Ω Except D and S 10 kΩ or higher If the result is not as specified, replace the park/neutral position switch.
- Measure the resistance according to the value(s) in the table below.