LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla S, 1.8 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission - U250E) >> Park/Neutral Position Switch >> Adjustment

Park/Neutral Position Switch: Adjustment

WARNING: This page is about a different variant/trim than selected.
  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    1. Loosen the 2 bolts of the park/neutral position switch and move the shift lever to N.
    2. Align the groove with the neutral basic line.
    3. Hold the switch in that position and tighten the 2 bolts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    4. After adjustment, perform the switch inspection (See PARK/NEUTRAL POSITION SWITCH ).
      Fig 1: Identifying Groove With Neutral Basic Line
      G06011490Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals