Differential Case: Inspection
WARNING: This page is about a different variant/trim than selected.
- INSPECT BACKLASH
- Using a dial indicator, inspect the backlash of the side gear.
Standard backlash:
0.05 to 0.20 mm (0.00197 to 0.00787 in.)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Thrust Washer Thickness
THRUST WASHER THICKNESS SPECIFICATION
| Mark |
Thickness (mm (in.)) |
| 1 |
1.000 (0.0394) |
| 2 |
1.100 (0.0433) |
| 3 |
1.200 (0.0472) |
| 4 |
1.300 (0.0512) |