DTC P0798 Pressure Control Solenoid "C" Electrical (Shift Solenoid Valve SL3): Description
WARNING: This page is about a different variant/trim than selected.
Shifting from 1st to 5th is performed in combination with "ON" and "OFF" operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which are controlled by the ECM. If an open or short circuit occurs in either of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated smoothly (Fail safe function).
DTC DETECTION CONDITION REFERENCE
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0798 | The ECM checks for an open or short in the shift solenoid valve SL3 circuit while driving and shifting gears. (1-trip detection logic)
|
|